Milano Stone Coated Metal Roof Tiles Wholesale

Multi-Layer Engineering
Each tile combines Galvalume steel (substrate) + acrylic primer + acrylic base coat + natural stone granules + acrylic top coat—a five-layer system engineered for adhesion, UV stability, and impact absorption.

Product Details

The Galvalume Substrate

Why Aluminum-Zinc Beats Standard Galvanized Steel

Our stone coated steel roof sheets begin with a Galvalume core (Al-Zn-Si alloy coating) that offers approximately 2–6 times the atmospheric corrosion resistance of conventional zinc-coated steel. The aluminum component forms a protective oxide film; zinc provides sacrificial protection at cut edges and scratches.

Acrylic Primer and Base Coat

The Adhesion Layer Most Suppliers Skip

After forming, the steel receives a corrosion-inhibiting acrylic primer followed by a thick acrylic base coat. This dual-layer bonding system is what anchors granules permanently to the surface. Inexpensive alternatives may use epoxy or polyester coatings that crack under thermal cycling.

Natural Basalt Stone Granules

Real Mineral, Not Dyed Ceramic Bead

We use crushed natural basalt with a Mohs hardness above 5.0, providing true UV absorption and color permanence. Unlike dyed ceramic beads that fade within 5–8 years under tropical sun, our granules maintain their original hue and structural hardness across the full warranty period.

Top Coat Sealing and Curing

Final Shield Against Staining and Abrasion

The granule surface is sealed with a clear acrylic top coat and oven-cured at controlled temperature. This locks granules in place, resists surface staining from tree sap or industrial fallout, and gives the tile a uniform matte texture that is both attractive and non-reflective.

Milano Stone Coated Metal Roof Tiles Wholesale

Milano Stone Coated Metal Roof Tiles Wholesale

Milano Stone Coated Metal Roof Tiles Wholesale

Milano Stone Coated Metal Roof Tiles Wholesale

FAQ

Q1.What steel thickness options are available?

A1.Standard range: 0.18-0.6mm. We recommend 0.45mm for most residential projects, 0.5mm+ for commercial or high-wind coastal areas. Custom thicknesses available for volume orders.

Q2.What is the total tile weight per square meter?

A2.Approximately 6.2–7.0 kg/m² depending on steel gauge and granule density. This is roughly one-sixth the weight of a clay or concrete tile roof of comparable coverage.

Q3.Are the tiles suitable for metal roof replacement over existing asphalt?

A3.Yes. The interlocking system and lightweight profile allow installation over existing decking or old roofing (after proper inspection) without structural reinforcement in most cases.

Q4.Can I get a physical material cross-section sample?

A4.We can ship a small cutaway sample showing all five layers with labels. Contact our technical team and specify your destination for shipping terms.




Leave your messages

We are a manufacturer specializing in B2B partnerships.

Related Products

x

Popular products

x
x